“Let our rigorous testing and reviews be your guidelines to A/V equipment – not marketing slogans”
Facebook Youtube Twitter instagram pinterest

Denon AVR-4308CI Preview

by July 03, 2007
Denon AVR-4308CI Receiver

Denon AVR-4308CI Receiver

The Denon AVR-4308CI picks up where the AVR-4306CI left off, adding some incredible new features that will make the new "digital" age of audio and high-definition video even easier to use. The AVR-4308CI ramps up HDMI capabilities along with power, Zone 2/3 functionality, Internet streaming features and... wait for it... adds Wi-Fi capability! Now you don't have to run a cable to your receiver to enable streaming of Internet radio or music from a local PC provided you have wireless access in your room.

Denon AVR-4308CI rear connections

New DACs allow for even digital audio sources to be routed to all zones and parallel HDMI outputs mean that if you want to run both a flat panel and front projector in the same room, you can. Remote access over the Internet allows custom installer to dial up a client's receiver and perform configuration updates or even firmware updates (if needed) without stepping foot in the home. This receiver is fully 12-bit (per channel) compatible with new Deep Color technology and provides HDMI repeater functions (not just switching) with full upconversion to 480p/720p/1080i/1080p.

Features Breakdown

  • 140W/channel x 7
  • Newly revised front panel and controls
  • ALL NEW GUI Setup and control interface (front panel setup possible as well)
  • Discrete Zone 2 component video output
  • Integrated Wi-Fi
  • Zone 4 digital input/output
  • 0.05% THD
  • 3 independent power transformers
  • 6 independent power supply circuits
  • Dynamic discrete surround circuit-HD (revised for HD audio formats)
  • Analog Devices SHARC 21366 (1) and 21367 (1) DSP
  • Dolby TrueHD and Dolby Digital+ decoding
  • dts-HD Master Audio decoding
  • Dolby Digital EX, dts ES Discrete/Matrix/Neo:6
  • XM-HD 5.1 with Neural Surround
  • Compressed audio restorer for portables/iPods
  • Audyssey MultEQ XT room correction with eight (8) mic positions
  • Revised Y/Mold setup microphone
  • AL24 processing (AL24+ on ALL CHANNELS)
  • 24-bit/192kHz DACs (2/8 ch PCM1791A)
  • Analog-to-Digital conversion all channels on stereo analogue inputs (24/192 PCM1804)
  • Variable high/low-pass crossover points (12/24dB) 40-250Hz
  • Assignable digital inputs
  • Denon Link 3rd (PCM/DSD compatibility)
  • 8-channel parallel digital inputs (for professional monitoring use)
  • iPod-ready with Denon D-dock
  • USB port (front and rear) for portable music players/flash drives/HDD with Command and Control functionality, on-screen data
  • XM Satellite Radio-ready (Mini-tuner compatible)
  • Multi-source, multi-zone discrete tuner select function (AM/FM/XM/HD)
  • HDMI 1.3a repeater inputs/outputs with support for 1080p/24/60 and 12-bit Deep color, xvYCC color space, auto lip sync correction, and 7.1 uncompressed 24-96 audio plus SACD
  • Analogue to HDMI video conversion/scaling (480p/720p/1080i/1080p)
  • Faroudja DCDi video processing (FLI-2310)
  • Audio Inputs/outputs:
    3 digital S/PDIF
    4 digital optical
    2 optical, assignable S/PDIF outputs
    Phono input
    10 analogue inputs including tuner
    2 analogue record outputs (with DAC to allow digital source output)
  • Video Inputs/outputs
    4 HDMI 1.3a inputs
    2 HDMI 1.3a outputs
    7 composite/s-video video inputs
    3 composite/s-video video outputs
    3 component video inputs (100MHz)
    2 parallel (main zone) component video outputs (100MHz)
  • Independent video conversion (s-video to composite/component for Zone 2)
  • Source delete function
  • Source function rename
  • Dual surround mode speaker selection
  • System setup/surround parameters lockout
  • 8-channel external analogue inputs
  • Pure Direct/Direct/Stereo modes for digital/analogue inputs
  • 6 DSP effect modes
  • Multi-channel stereo mode
  • 56-station auto-preset memory tuning
  • RS-232 port with new Denon 2-way remote control and RF/IR base station
  • RJ-45 Ethernet port (MAC/PC streaming, Internet radio, web browser, enhanced for WMA lossless and AAC)
  • PC setup and control via Ethernet (with remote off-site diagnosis, correction, update and upgrade capability)
  • 3-zone, 3-source (with DACs for digital audio PCM support and Zone 4 digital I/O)
  • Composite video output for second zone with OSD for meta-data from iPod/XM/streaming
  • Discrete IR remote codes (4 for main zone, 2 for multi-zone)
  • Enhanced power amplifier assign for multi-zone (Zones 2 and/or 3 in split mono) or bi-amping; nine (9) modes in all
  • 8 channel preamp outputs for main zone
  • Relay-controlled protection circuits
  • New enhanced multi-zone remote with punch-through commands
  • Compatible with RC-7000/7001CI IR/RF 2-way remote/base station (optional
  • 40.8 pounds
  • Dimensions: 17.1" x 7.7" x 17.9"

MSRP is expected to be $2499 and availability is later this month.

For more information, Visit:  Denon USA

 

About the author:
author portrait

Clint Deboer was terminated from Audioholics for misconduct on April 4th, 2014. He no longer represents Audioholics in any fashion.

View full profile